Instrumentation Controls Engineering Jobs
JE200000006
Position Title = Electrical/Instrument Reliability Engineer
Education Required = BSEE
Years Experience Required = 0-5
Position Description =
Job Responsibilities:
Provide electrical and instrumentation technical and project support working through the maintenance department. Develop
preventative maintenance procedures and drive reliability improvements in the power distribution systems and process
instrumentation for the complex. Specific duties include, but are not limited to:
Inspect repair work in progress at outside repair facilities.
Provide technical assistance for the instrument-electrical needs of the complex.
Generate new electrical maintenance standards and update existing ones.
Develop and lead the plant wide electrical predictive and preventive maintenance programs. Work with outside contractors
and/or engineers in the inspection and problem solving of the plant electrical systems.
Generate electrical maintenance procedures.
Organize and direct an instrument-electrical training program.
Institute training procedures and inspections that will bring plant into compliance with OSHA 29 CFR Part 1910, NFPA 70E,
as well as other applicable standards.
Conduct plant wide electrical safety audits.
Review stores stock for addition/deletion of instrument and electrical equipment.
Investigate state of the art technology to assure that the maintenance efforts utilize the best available technology.
Job Location = Baton Rouge, LA area
Position Title = Electrical/Instrument Reliability Engineer
Education Required = BSEE
Years Experience Required = 0-5
Position Description =
Job Responsibilities:
Provide electrical and instrumentation technical and project support working through the maintenance department. Develop
preventative maintenance procedures and drive reliability improvements in the power distribution systems and process
instrumentation for the complex. Specific duties include, but are not limited to:
Inspect repair work in progress at outside repair facilities.
Provide technical assistance for the instrument-electrical needs of the complex.
Generate new electrical maintenance standards and update existing ones.
Develop and lead the plant wide electrical predictive and preventive maintenance programs. Work with outside contractors
and/or engineers in the inspection and problem solving of the plant electrical systems.
Generate electrical maintenance procedures.
Organize and direct an instrument-electrical training program.
Institute training procedures and inspections that will bring plant into compliance with OSHA 29 CFR Part 1910, NFPA 70E,
as well as other applicable standards.
Conduct plant wide electrical safety audits.
Review stores stock for addition/deletion of instrument and electrical equipment.
Investigate state of the art technology to assure that the maintenance efforts utilize the best available technology.
Job Location = Baton Rouge, LA area
JE340000003
Position Title: Instrumentation & Controls Engineer
Education Required: BSEE
Years Experience Required: 5+
Position Description: Design of power plant and/or petrochemical plant instrumentation and control systems.
Location = New Orleans
Position Title: Instrumentation & Controls Engineer
Education Required: BSEE
Years Experience Required: 5+
Position Description: Design of power plant and/or petrochemical plant instrumentation and control systems.
Location = New Orleans
JE200000012 & JE340000004
Position Title = Electrical or Instrumentation Engineers (2)
Education and/or Experience Required = BSEE with 1 to 3 years experience
Position Description = Short term (6 months) assignment in Qatar working for a major US corporation. The work will
involve the design of an LNG Plant. The need is immediate. Travel package and accommodations will be provided.
Location = Qatar (Middle East)
Position Title = Electrical or Instrumentation Engineers (2)
Education and/or Experience Required = BSEE with 1 to 3 years experience
Position Description = Short term (6 months) assignment in Qatar working for a major US corporation. The work will
involve the design of an LNG Plant. The need is immediate. Travel package and accommodations will be provided.
Location = Qatar (Middle East)
JE340000005
Position Title: Instrumentation & Controls Engineer
Education Required: BSEE
Years Experience Required: 5+
Position Description: Design of oil & gas and/or refinery/petrochemical plant instrumentation and control systems.
Location = New Orleans
Position Title: Instrumentation & Controls Engineer
Education Required: BSEE
Years Experience Required: 5+
Position Description: Design of oil & gas and/or refinery/petrochemical plant instrumentation and control systems.
Location = New Orleans
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Intech.net
International Technical Services
International Technical Services
Engineering Recruiters Engineering Employment Agency Engineering Headhunters Contract Staffing Agency Engineering Jobs
This page contains Job Descriptions for Instrumentation Controls Engineering Jobs that we have available.
JE340000008
Position Title = Instrumentation Engineer
Education Required = BSEE
Years Experience Required = 5-7 (10+ preferred)
Position Description = Responsible for sizing/specifying all instrumentation utilized for analysis, flow, level, pressure, and
temperature measurement.
Responsibilities
- Specifies sizing/selection of analyzers, flow elements, control valves
- Specifies flow, level, pressure, and temperature transmitters/switches for general process applications as well as safety,
combustion, ESD, and metering systems
- Supplies the specification of DCS and PLC system hardware and software
- Creates instrument data sheets, instrument indices, instrument system wiring diagrams, and cable schedules
- Prepares instrument and control philosophy documents and block diagrams
- Creates bid documents (RFQ’s), bid analysis, and purchase requisitions
Qualifications
- 5-7 (10+ preferred) years experience in the petroleum industry sector
- A working knowledge of US and International codes and standards such as API, ISA, IEC, NEC, NFPA, etc.
Job Location = Lake Charles, Louisiana
Position Title = Instrumentation Engineer
Education Required = BSEE
Years Experience Required = 5-7 (10+ preferred)
Position Description = Responsible for sizing/specifying all instrumentation utilized for analysis, flow, level, pressure, and
temperature measurement.
Responsibilities
- Specifies sizing/selection of analyzers, flow elements, control valves
- Specifies flow, level, pressure, and temperature transmitters/switches for general process applications as well as safety,
combustion, ESD, and metering systems
- Supplies the specification of DCS and PLC system hardware and software
- Creates instrument data sheets, instrument indices, instrument system wiring diagrams, and cable schedules
- Prepares instrument and control philosophy documents and block diagrams
- Creates bid documents (RFQ’s), bid analysis, and purchase requisitions
Qualifications
- 5-7 (10+ preferred) years experience in the petroleum industry sector
- A working knowledge of US and International codes and standards such as API, ISA, IEC, NEC, NFPA, etc.
Job Location = Lake Charles, Louisiana
See also Electrical Engineering Jobs
| Home Latest Jobs Browse Jobs Submit Job Submit Resume Contact Us Referral Fee About Us Tools & Games IT Recruiters Engineering Links |
| __________________________________________________________________________________ |
| Copyright© 2010 International Technical Services, LLC. All Rights Reserved. |
JE340000009
Position Title = Instrument Engineer
Education Required = BSEE
Years Experience Required = 5
Job Description = This is a 2-4 week contract assignment
Position Title = Instrument Engineer
Education Required = BSEE
Years Experience Required = 5
Job Description = This is a 2-4 week contract assignment
- Engineer will perform a review for the correct application of Siemens logic block and logic construction within the burner
management control system the client’s heat transfer fluid forced draft fan natural gas fired heaters. - Required to evaluate the existing code and revert with a report confirming the software is fit for purpose or provide
recommendations if required for further action.
- Siemens S7400 Simatic (PCS7 Software) experience.
- Be totally conversant with Siemens products.
- Have sound working knowledge of natural gas heater or boiler control systems.
JE340000010
Position Title = Instrument Engineer
Education Required = BSEE
Years Experience Required = 5
Job Description = Immediate opening for Instrument Engineer for six month plus assignment in Southeast Texas.
Position Title = Instrument Engineer
Education Required = BSEE
Years Experience Required = 5
Job Description = Immediate opening for Instrument Engineer for six month plus assignment in Southeast Texas.
- Engineer will support the client’s lead Instrument and Controls Engineer to ensure that instrument and controls design
meets project specifications, client standards and USA regulatory requirements. - Provide sound technical direction to contractor and vendor staff on instrumentation and controls problems during the
commissioning of Yokogawa instrument and control issues. - Interface with vendors to resolve Yokogawa instrument and control issues.
- Manage interfaces with other discipline teams.
- Assist in troubleshooting serial communications TCP/IP, Modbus, OPC.
- Instrument and controls engineering technical knowledge BE or similar.
- Instrument and controls design work experience in supervisory role.
- Instrument and controls construction and commissioning experience.
- Technical knowledge on control and safety systems with prior experience of configuring the systems and managing
work by contractor’s personnel. - Preferable to have Yokogawa Centium and/or Prosafe knowledge.
- Preferable to have Modbus knowledge.
- Control system start up experience
- Motivated, energetic team player.
- Open, clear communicator.